Heat Pumps
A More Efficient Way to Cool Your Home
When it’s time to replace your cooling system, you have many different options to choose from. But if you are looking for a more efficient way to cool your home, a heat pump could be a great fit for you! Hubbs Heating & Air offers a large selection of Bryant heat pumps that can save you money on your energy bills. You can review our product selection of heat pumps below, but keep in mind we carry a few more units! Give Hubbs Heating & Air a call today to discuss your home’s cooling needs and we can help find your perfect heat pump!
Product Selection
Evolution® Series
Heat Pump
Bryant® Evolution® Series heat pumps offer our highest quality efficiency and performance available. From the 2014 ENERGY STAR® Most Efficient Model, the Evolution® Extreme, to the variable-speed and 1- and 2-stage units, you can count on SEER ratings of at least 19 and the option of total control with an Evolution® Connex® control.
280A
SEER Rating: up to 20.5
HSPF Rating: up to 13.0
Compressor Type: Variable-Speed
289B
SEER Rating: up to 19
HSPF Rating: up to 10.0
Compressor Type: Two-Stage
288BNV
SEER Rating: up to 18
HSPF Rating: up to 11
Compressor Type: Variable-Speed
286BNC
SEER Rating: up to 17.5
HSPF Rating: up to 9.5
Compressor Type: Two-Stage
286B
SEER Rating: up to 17.5
HSPF Rating: up to 9.5
Compressor Type: Two-Stage
285B
SEER Rating: up to 16
HSPF Rating: up to 8.5
Compressor Type: Single-Stage
Preferred™ Series
Heat Pump
Preferred™ Series Heat Pumps deliver all-season flexibility for total home comfort, with up to 17.5 SEER ratings. Enjoy heating and cooling energy savings year-round. Available in a 1- and 2-stage unit or compact unit, the Preferred™ Series of heat pumps can take care of your comfort needs.
226A
SEER Rating: up to 17.5
HSPF Rating: up to 9.5
Compressor Type: Two-Stage
225B
SEER Rating: up to 16
HSPF Rating: up to 9.0
Compressor Type: Single-Stage
226C
SEER Rating: up to 16
HSPF Rating: up to 9.0
Compressor Type: Single-Stage
224ANS
SEER Rating: up to 14
HSPF Rating: up to 8.2
Compressor Type: Single-Stage
Legacy™ Line
Heat Pump
The Legacy™ Line heat pumps are an affordable solution to your whole-home, year-round comfort needs. Operating efficiently both in summer and winter, the Legacy Line heat pump is a great option for value heating and cooling year after year.
215B
SEER Rating: 15
HSPF Rating: 8.5
Compressor Type: Single-Stage
214DNC
SEER Rating: 14
HSPF Rating: 8.2
Compressor Type: Single-Stage
214D
SEER Rating: 14
HSPF Rating: 8.2
Compressor Type: Single-Stage
Efficiency
Seer
SEER stands for the Seasonal Energy Efficiency Ratio and is the measure of efficiency by which the cooling process of air conditioner or heat pump systems are rated. The higher the SEER number, the greater the efficiency, and therefore the greater the energy savings. Today, U.S. regulatory agencies require all new products to have a 13.0 SEER rating or better.
HSPF
The term HSPF stands for Heating Seasonal Performance Factor and is the efficiency measurement used to gauge the efficiency of the heating mode of heat pumps. Again, the higher the number, the greater the efficiency. Today’s models are required to have a minimum 7.7 HSPF.
Compressor Technology
Unlike conventional single or two-stage motors, a variable-speed compressor runs at a wide range of speeds to precisely control the flow of heated and cooled air throughout your home. A variable-speed compressor is able to ramp up and down its performance in small increments in order to deliver maximum comfort and efficiency.
Two-stage cooling means the air conditioner or heat pump has a compressor with two levels of operation: high for very warm climate and low for milder temperatures. Typically the low setting is adequate to meet household cooling demands 80% of the time. A compressor operating at the low setting will run for longer periods of time and produces consistent even temperatures throughout the day. Longer cooling cycles translate to quieter, more efficient operation.
Single-stage cooling means that the air conditioner or heat pump has a compressor with a single level of operation. The compressor is either off or on depending on the cooling demands of the home.